"wall"

No 1. Collins Wharf is the latest part of the $1.2 billion development of the Victoria Harbour precinct. The 29-level apartment complex, built by Lend Lease and designed by Architectural firm, Bates Smart was completed in September this year and boasts 321 water-lined apartments and townhouses. Expoconti were awarded the wall and ceiling contract for the $106M development and soon after contacted Rondo to supply systems for the external walls, external cladding and internal suspended ceiling system.

Installation of floor and wall coverings, Sealants application, Surface preparation, Tile & stone installation systems, Waterproofing

The NSW SES used Acrovyn by Design, where the walls were all white and needed some visualisation.

Being one of the largest public healthcare precincts in Australia at 160,000 m² and spread across 20 hectares of land at Birtinya north of Brisbane, we present the 750 bed Sunshine Coast University Hospital (SCUH). The SCUH has been designed for Queensland Health to be a world class health facility providing exceptional healthcare to its patients as part of Queensland Health’s vision for the future.Incorporated within this Hospital’s health precinct, this state-of-the-art facility offers numerous services for staff and patients. With all that the SCUH has to offer, it was vital that all the equipment and fittings that were required needed to be compliant, safe, practical and had an exceptional appearance. This is where the CS Group was able to provide a portfolio of products to the project that were both practical and aesthetically pleasing.All hospitals have high volumes of wheeled corridor traffic, these day-to-day movements are commonly encountered in a busy hospital. Due to this traffic, it is difficult to keep walls in their original pristine condition. To try to limit the damage that can be caused by wayward trolleys and gurneys, wall protection is put in place.Construction Specialties have supplied a portfolio of products to the SCUH to meet these needs. Starting with their corner protection for the gyprock walls, the CS Group’s VA 250N corner guard can be found throughout the Hospital in both 90 and 135 degree configurations protecting salient corners from damage. Protecting the walls from damage is CS Model SCR-48N crash rail, a 152 mm wide x 32 mm deep Acrovyn crash rail that is installed in the Hospital in both single and double runs for maximum protection. CS Model HRB-4CN Acrovyn handrail, which also acts as a high-level bump rail, completes the wall protection package.Posing a separate challenge to designers were the two Isolation Wards. Both are located within the Hospital in such a way that neither has access to an external window. Rather than have patients stare at blank walls during their stay, CS were asked if we had a solution to the problem. Our graphic imaging product, Acrovyn by Design was suggested as a possible solution and was accepted. Both wards now have a full height wall mural of a relaxing beach scene to look at rather than a typical blank white hospital wall alongside their beds.With such large footprints, each floor of the Hospital required extensive use of expansion joint covers. Construction Specialties were called on to help with the design and specification of expansion joint covers for the project. The CS Group’s SGR Model expansion joint cover was selected for the project as it is available in various widths, the Hospital being 5 floors, as well as allowing a flush mounted finish. The SGR was also chosen for its ability to accommodate wheeled traffic and meet the stringent requirements of infection control associated with a hospital project.Beautiful and practical are two words that can be used to describe the Sunshine Coast University Hospital. An amazing project featuring various CS products throughout the Hospital.

One of the suites at the St John of God Bendigo Hospital, features a bath for pain relief, and an Acrovyn by Design wall mural.

Haymes paint supplied paints for the new entrance and feature wall at Mr Panda Bubble Tea House in Cranbourne, Melbourne.

Located in Fortitude Valley in the heart of Brisbane. Builder, Multiplex began Stage 1 of this $200m project in May 2015 and completed it in July this year. Subcontractor, Precision Interior Walls & Ceilings enlisted Rondo’s expertise in designing the internal ceilings and partitions, external walls and soffit framing. Designed by Architect’s Elenberg Fraser, Stage 1 of the development consisted of 32 levels with 910 luxury apartments sprawled across two towers. This will eventually form part of three residential towers incorporating ground floor retail areas, cafés, restaurants and over 1000 apartments in total.

Working directly with sub-contractors Donnybrook Interiors and Architectural Ceiling Systems, Rondo delivered the walls and ceilings for this unique $15million build.

Expoconti and Rondo, along with the project architects, Lysons Architects and builder, Brookfield Multiplex, combined their expertise to ensure the design and construction of the RMIT Swanston Academic Building (SAB) offers a higher quality and innovative learning experience for students. To achieve this, the newly launched Rondo MAXIframe External Wall Framing System was specified, with Rondo MAXIjamb designed for installation around door jambs and internal window openings. This meant Expoconti could save time on site as MAXIjamb replaces the necessity for multiple stud configurations, as well as offering greater performance capacities than traditional wall stud framing.

Enclosed by three walls consisting of large panelled sliding doors, this rural property near Byron Bay maximises the opportunities to enjoy the sweeping rural aspect.

Golden Yellow PROBOND Facade FR is a stunning addition to this architect-designed building. The contrast against the natural earthiness of the timber feature walls is used to great effect.

The £70 million project saw SAS International design and manufacture bespoke spun alum­inium profiled discs, acoustic metal wall panelling and System 600 rafts in the new terminal. The architects 3D Reid had to make the building light, airy and modern yet the façade and various materials used within the terminal had to withstand potential of a security breach. All products installed ‘land-side’ were required to meet the requirements of Aviation Security in Airport Development (ASIAD). The result answers aesthetic demands, yet provides the highest level of performance for the requirements of the building. For the design to be realised, square aluminium sheets were cut by the manufacturer into a circle and spun into a dome. Installation in such an environment means safety cables had to be attached to each disc, wall panel, tile and raft to ensure they do not fall and cause injury. Allowance for safety cables to be attached had to be taken into consideration during the design phase. Large vertical wall panels with an ultra-micro perforation were also specified to provide the necessary acoustic properties required for this vast open space. The very fine 0.7mm perforation, with 1% open area, helps to manage acoustics within the large open spaced terminal. The off-site modular manufacture of the architectural metalwork products meant installation was quicker, which causes less disruption to such a busy environment, and in addition there is no waste on site. Aesthetic versatility can be achieved using SAS International Architectural Metalwork throughout projects. It also allows for inte­gration of M&E services into the building design while meeting design demands and durability requirements. The range includes acoustic baffles, acoustic wall panels, air handling units, bespoke ceilings, and column casings.

Embracing views of manicured fairways, this luxurious mansion in Sanctuary Cove combines soaring ceilings with extensive walls of glazed sliding doors to deliver indoor-outdoor living beyond compare.

CBS-A and Composite Industries began construction back in September 2015. The Rondo technical team provided ongoing support on the engineering of blade walls to façade in the main hotel building and car park.

Rondo supplied the Drywall Framing System in the construction of Ferrari World in Abu Dhabi, which is the world’s largest indoor theme park ­– including wall heights that ranged from 9 meters and above.

Rondo supplied Steel Stud and Track, KEY-LOCK Furring Channel and Top Cross Rail, and EXANGLE P50 Shadowline Stopping Angle to complete the base fit out and wall linings on 45 levels of the building.

Rondo was called upon to supply our market leading Seismic Wall and Ceiling System including Steel Stud & Track Drywall Framing, KEY-LOCK Concealed Suspended Ceilings, and DUO Exposed Grid Ceiling Systems.

Rondo worked closely with Wadsworth Contracting providing KEY-LOCK Concealed Ceiling Systems, Panther Access Panels, plastering beads as well as external 92mm framing, soffit framing, internal 76 & 64mm wall framing.

Acrovyn by Design, was the ideal product to promote a fun and healing environment in the children's unit of the Royal Hobart Hospital. Displaying images that portray an Antarctic theme throughout 47 bedheads of the hospital for the use of aesthetics and protecting the walls of the hospital.

Rondo was able to provide a solution to suit the projects’ specific design criteria by using readily available materials and technical support. The wall framing for the MPS room consisted of over 31m of 150mm Steel Stud and Track, including noggings.

The project has called on our Technical Services Team for wall and ceiling designs, with significant quantities of Rondo systems used in the project including Rondo Stud and Track, KEY-LOCK Concealed Suspended Ceiling Systems and PANTHER Access Panels.

For instance, Superior faced the challenge of creating curved detailed bulkheads and feature ceilings. However, with Rondo’s help using a hybrid of the Rondo KEY-LOCK Concealed Ceiling System and Stud & Track Wall Framing System, they managed to create a great outcome.

The $11.3 million dollar renovation of Lambton Square required Rondo product throughout including our Key-Lock Concealed Ceiling System, Steel Stud Wall framing system and various other Rondo components for the fixing of plasterboard and feature panels.

IOI City Mall is the biggest shopping mall in Malaysia at 1.35 million square feet, incorporating Rondo Drywall Framing for the internal wall partitions. This mall comes together with 2 tower office blocks and one hotel which will be completed in stages.

The project was subject to wind loading up to 2.8kPa ultimate and 1.9kPa serviceability. Our technical designs specified wall and ceiling systems, as well as complementary accessories to be supplied to the project. Being able to provide tailored designs within a tight deadline was crucial to the project.

Rondo is proud to be a supplier to ADNOC's new headquarters complex, which will be both a landmark building for the company as well as for the United Arab Emirates. Rondo have supplied the drywall framing as well as a wall cladding system using Rondo Furring Channel and fixing clips.

The project was developed thanks to the assistance of builders BGC Construction, ceilings and walls M2 Contracting and distributors Perth Plasterboard Centre. Local supply chain efforts have proven this project to be a success with on-time delivery, reliability, excellent customer service and the ease of installation.

Timber features were used throughout the project, with Decortech acoustic panels used to clad both internal and external ceilings. Rondo, in collaboration with BVT Engineering was engaged to provide design assistance for all external soffits/ceilings, internal walls and ceiling framing.

Located marina-side in one of Auckland’s most exciting new precincts. It also straddles Aucklands CBD making it Aucklands premier destination. Rondo provided the full interior package, including walls and ceilings for the residential gym, business centre and boutique theatre.

Design requirements had to be completed prior to commencement of trades, with an extensive design folder put together by Rondo’s Technical Services Team. The design of all wall types for the entire project were carried out by Grocon’s engineering department, assisted by Rondo’s own Engineers.

Rondo became involved with the project in mid-June when approached about using our Studs to make up the main walls that separate the building into individual shop outlets. As there was no time for the Contractor to source structural steel (which would take up to five weeks).

Rondo’s Technical Team supplied emblematic CAD floor plans and designs for wall types including acoustic and fire rating to board to the manufacturer’s specifications. Onsite support from Rondo included assistance in setting out, framing, lining and finishing training as well material supply coordination.

Rondo worked closely with C&L Ceilings who were charged with the wall and ceiling contract. In order to be sure that the building’s external facade would remain structurally secure and adhere to the architectural detail, C&L installed Fibrous Cement Sheets, supported by heavy gauge Rondo components.

Rondo were approached by Expoconti to supply the necessary wall and ceiling component of the build. The tower features multiple “loft” style apartments, which allows it to nestle one and two-bedroom apartments in an overlapping formation, giving both high-ceiling living areas and lofty mezzanine interior spaces.

Rondo Technical Representative Tino Cucinotta, worked closely with the 2DG team – and assisted with the supply of QUIET STUD Acoustic Wall System, Stud & Track and Finishing Sections, whilst Rondo’s newly released XPRESS Drywall Grid Ceiling System was due to arrive, ensuring the project could continue efficiently.

The Rondo team were engaged in the project to design the ceiling framework for the lobby of the twenty-five-storey building. The Rondo KEY-LOCK suspended ceiling system with radius top cross rail was specified to create the proposed arch ceiling, along with Steel Stud and Track for the walls in other areas of the project.