""

This new building was constructed by Lend Lease with Foxville Projects Group (NSW) being appointed as the lead fit out contractor. Rondo supplied an extensive range of ceiling and partition systems, as well as technical support throughout the project, which included design for all the internal walls, shelf loads, balustrade design utilising stud and track as well as ongoing support throughout the project construction period in regards to Rondo products within the design criteria.

The Rondo team were engaged in the project to design the ceiling framework for the lobby of the twenty-five-storey building. The Rondo KEY-LOCK suspended ceiling system with radius top cross rail was specified to create the proposed arch ceiling, along with Steel Stud and Track for the walls in other areas of the project.

MP Group were charged with managing the installation and finishing of all internal and external walls and this is also where Rondo offered our support. With the external structural steel framing having been installed 150mm out of position, Rondo’s Technical Services Team came to the rescue and designed an external stud wall system using our MAXIframe External Wall Framing System to ‘fill the gap,’ including design of special header bracing details to support the wall.

Working beside Doig Architecture, Rondo provided expert design and technical advice particularly with the high internal walls. Regular on-site inspections ensured products were installed to specification and delivered on time. Rondo Technical Sales Representative Tino Cucinotta said “The project benefited from our Technical Service team who were readily available to provide design advice when required”.

The 12 Stewart Avenue, Newcastle features the following RBA products:B3699 – Bobrick Paper Towel & Waste BinB2111 – Bobrick Vertical Soap DispenserKB110-SSWM – Koala Kare Stainless Baby Change TableB7120 – Bobrick Trimline Hand DryerKB200-01 – Koala Kare Baby Change TableB2890 – Jumbo Toilet Roll HolderB4112 – Bobrick Contura Soap DispenserB295x14 – Accessible Compliant Stainless Steel ShelfRBA1083-607 – ‘Inox’ Self Closing Time Flow TapB1556-DIS – Accessible Compliant MirrorB542 – Bobrick Cubicle HookRBA1053-600 – Wall Mount TapRBA4330-024 – Unisex Access WC, Baby Braille SignRBA4150-230 – 90° Wraparound Grab Rail & Backrest, Left Hand

Rondo’s Seismic products within each system included DUO Perimeter Trim Sliding Clip (Rondo 850), KEY-LOCK TCR Seismic Joiner (Rondo 865) and Seismic plenum braces. With the KEY-LOCK Seismic Concealed Ceiling System, two-side fixed, free wall perimeter connections and Rondo 141 Wall Track (1.15BMT to suit 129 Furring Channel) was used.

Contractor: Superior Group, NWCI Pty Ltd, Mewcastle Pty,Ltd. TAF Group Location: Gold Coast, Queensland Project Value: $1.76 billion

This two-year, $100 million project was undertaken by builders Built, subcontractors Expoconti, and Bruce Henderson Architects for developers Hengyi. Using our MAXIframe External Wall Framing System, we were able to provide a full design specification for the entire external façade that met wind load requirements, also providing one stud wall to accommodate both internal and external linings.

The Revesby Workers Club features the following RBA products:B7128e – Trimline Hand DryerB3803 – Trimline Paper Towel & Waste DispenserB4288 – Contura Toilet Roll HolderRBA4040-301 – Grab Rail SetB4112 – Contura Soap DispenserB295x14 – Accessible Compliant ShelfB43944 – Contura Paper Towel & Waste

Protective epoxy flooring in residential living area.

Rondo were approached by Expoconti to supply the necessary wall and ceiling component of the build. The tower features multiple “loft” style apartments, which allows it to nestle one and two-bedroom apartments in an overlapping formation, giving both high-ceiling living areas and lofty mezzanine interior spaces.

Protective epoxy flooring in a photography studio.

Rondo worked closely with Wadsworth Contracting providing KEY-LOCK Concealed Ceiling Systems, Panther Access Panels, plastering beads as well as external 92mm framing, soffit framing, internal 76 & 64mm wall framing.

The Project team consisted of builder, Doric, who awarded the ceiling and wall package to Ceiling & Wall Contracting (CWC) and KB Carpentry. Rondo Partner Network Distributer, Superb Group, provided supply of various Rondo products. Rondo was engaged by Peter Hunt Architects early in the documentation stages of the project, allowing an ease of understanding between all parties.

Rondo have supplied the suspended ceiling support frame for a metal panel ceiling which will be used in the construction of the Doha International Airport project.

Rondo has played a major role in the nearly 5,000m2 ‘105 on Mitchell Street’ hotel redevelopment. Rondo has so far provided about 8,000m2 of KEY-LOCK Concealed Suspended Ceiling System and 76mm Steel Stud Drywall Framing to this project.

The Australian Parliament House features the following RBA products:B4112 – Bobrick Contura™ Surface Mounted Soap DispenserB38034 – Bobrick Paper Towel & Waste, Trimline™ series Also referred to as Capital Hill, the Australian Parliament House is the central meeting place for the Parliament of Australia. Designed to hold 5000 people when Parliament meets, the 32 hectare site is where Australia’s biggest decisions are made by agents of our citizens. RBA has consistently provided for Capital Hill during the 21st Century in a bid to provide world-class products for Australia’s representatives.Located in the heart of Canberra in the Australian Capital Territory, the Australian Parliament House was designed to better accommodate a larger number of people, meaning a greater amount of facilities for its growing occupancy. The building is designed to be spacious and not intimidating to the public, encouraging citizens to visit. Catering for Capital Hill’s requirements of security, high traffic and minimal maintenance, RBA has supplied a number of Bobrick Accessories specific to this project, suitable for both the highest of political representatives and the average citizen.RBA’s Bobrick Contura™ Surface Mounted Soap Dispenser, or the B4112, is made of strong Stainless Steel and holds a capacity of 1.2L. The unit is Antibacterial Soap resistant, allowing for its users to maintain optimal hygiene without wear and tear. Needing nominal maintenance, the B4112 is ideal for high traffic locations. Exhibiting a Satin Finish, the unit is a subtle addition to the facilities whilst simultaneously complimenting the silver notes in the Washroom design.Also pictured below is RBA’s Bobrick Trimline™ Recessed 2-in-1 Combination Unit, containing both a Paper Towel Dispenser and Waste Receptacle B38034. Recessed in nature, the unit invades minimal space while holding a large capacity of 600 C-fold of 800 multifold paper towels and a waste capacity of 14.4L, sporting two Tumbler Locks for security. It too has a Satin Finish to its Stainless Steel exterior, matching the B4112, maintaining a consistent aesthetic as well as blending in with the amenities. 

Inspired by water droplets in the wild, the POD Pavilion showcases the new sustainable urban development located in Petaling Jaya Commercial City, west of Kuala Lumpur. Designed by Hijjas Kasturi Associates in collaboration with Studio Nicoletti Associati (Italy), the POD Pavilion is now PJCC’s corporate office and sales gallery. Rondo provided both product and design assistance to the project, which required a significant amount of input because of its unique elliptical design.

Rondo Steel Stud Drywall Framing System will be used in the construction of the Dubai International Airport - Concourse 4 project.

Rondo has supplied an external soffit ceiling frame for the Dubai Metro Station project. The Green Line of the Dubai Metro is the second Dubai Metro light rail line in Dubai. The route starts in Al Ghusais, and runs along Al Nahda Rd and Salahuddin Rd above ground. The Green line runs through Deira and Bur Dubai and generally runs parallel to Dubai Creek.

A new build at a Total Tools Outlet required signage on an enormous scale. The largest of three massive signs was over 23 metres long.PROBOND Ultra® in Ultramarine Blue and Traffic Yellow was used for the base signage.

Construction has concluded on the redevelopment of the ‘old Harris Scarfe’ site at Rundle Mall in Adelaide. The renovations seek to re-energise the area but remain committed to preserve Adelaide’s most cherished department store. Four floors of retail space have had the base built by Interior Projects who have been a valued Rondo customer since 1988. Rondo provided essential technical expertise and design solutions for the fire walls and security mesh between tenancies.

The $200 million Lend Lease Lakeside Joondalup Shopping Centre development opened in November 2014, making it the largest shopping destination in Western Australia. Contractors C & L Ceilings in conjunction with Rondo’s Technical Services Team designed pre-fabricated sections that could be built off-site and then transported to site complete, reducing installation costs and time delays.

7000m² of SAS310 helped Qantas Airways overcome acoustic challenges, controling reverberation time and meeting a very high acoustic performance target. Qantas Airways Limited, nicknamed ‘The Flying Kangaroo’, is Australia’s largest airline. The new headquarters is the largest property project undertaken by Qantas Airways in the last 10 years. The project aims to rejuvenate the existing campus, consolidating and upgrading four existing office buildings and joining them together with an interconnecting hub. Selected areas of the existing building floorplate have been extended into the new atrium space creating balconies and office pods. These improved physical and visual connections aim to encourage interaction and engagement between workers. With a brief for high acoustic performance, SAS International were an obvious choice for Hassell architects, due to our vast portfolio of high acoustic rated metal ceiling tiles. SAS provided 7000m² of SAS310. The acoustic challenge was to control the reverberation time in a large volume space accommodating a PA system and a very high acoustic performance target. The reverberation time was significantly reduced with the addition of absorptive material and purposed designed acoustic ceiling panels. Qantas Headquarters was constructed with longevity in mind so the durability of the tiles was key, an advantage of using metal. The finish completely meets the performance demands, is extremely functional and cost effective, an A Grade corporate campus that incorporates the latest developments in sustainability and energy efficiency.

The University of Technology Sydney (UTS) is located in the heart of Sydney. In February 2015 the Faculty of Science and Graduate School of Health Building opened its door to its first cohort of students. Built as a 5 Star Green Star building, it provides a range of spaces for collaborative learning and research. SAS150 was specified across the new state of the art research labs and SAS205 for the corridors of the University.

This unique offset ellipse design tower had to allow the ceiling to flow around the building. A bespoke SAS330 metal ceiling system was specified incorporating trapezoidal panels. Trust Tower forms one of three new tower blocks; part of the Central Market development. The first tower to be completed is tower three a 59-storey commercial office development. The tower is a unique offset ellipse design, to allow the ceiling to flow around the building a bespoke. SAS330 metal ceiling system was specified incorporating trapezoidal panels. Enabling a monolithic finish to the ceiling plane, black service troughs house recessed lighting and other MEP services; this enables maximum acoustic performance to be achieved from the ceiling tiles. Over 900 different sized ceiling tiles were manufactured and installed throughout the project. Metal ceilings provide durability, accessibility to the ceiling void and low maintenance. The life-span of SAS International’s metal ceilings is in excess of 25 years with only very basic maintenance. The entrance mezzanine area features a four-storey high ceiling finished in midnight blue, providing a dramatic entrance to this iconic building.

Sculpform Design Studio in central Melbourne is designed by Woods Bagot and utilises Curved Timber Battens to create a stunning studio space for us to work collaboratively with the clients. Working with Australia’s leading architects and builders is Sculpform's strength, and the vision behind the studio was an environment to foster and enhance that collaboration process. Far from a typical showroom, the studio centres around the Co-lab workshop, where clients can interact and understand the practicalities of the products.

The refurbishment of the Victoria Gardens shopping centre designed by Colab Design Studio uses Sculpform's Aluminium Click-on Batten system to create a stunning curved Oculus, along with feature walls and ceilings throughout the centre. Sculptform’s Click-on batten system provided a unique solution that could be customised to address the incredibly complex geometry of the existing architecture. Being able to use the same system for the mall cladding, mall ceiling installations and the oculus cladding ensured absolute consistency across the entire centre.

SAS International's bespoke waveform acoustic baffle ceiling solution was used as a feature in the new Skype Headquarters. An SAS International bespoke waveform acoustic baffle ceiling solution incorporating luminaires by Zumtobel, was specified by Walker and Martin Architects (WAM) for the new Skype Headquarters. Situated in Luxembourg, the new building forms part of the regeneration works to an existing brewery located in Clausen, the old quarter of Luxembourg City. The challenge set by the client was to provide an interior that would inspire innovation in the daily workplace of Skype employees whilst retaining an element of corporate sophistication. The solution helped create a dynamic and flexible office space. In the design, development and installation of the system, WAM worked closely with SAS International, to ensure the baffles integrated seamlessly with the luminaires to suit the ceiling and building shape. WAM designed the acoustic baffle ceiling solution with technical help from SAS International, then developed the layout to achieve the ‘wave’ and ‘fluid’ affect. Stuart Walker adds, “The ceiling design gives an uplifting ambience to the space, people ‘look up’ when they enter and immediately know they are in a space that challenges office convention with innovative thinking.” Another consideration that WAM took when selecting materials for the fit out process was the impact on the environment. SAS International metal ceilings have a lifespan in excess of 25 years with only very basic maintenance. These products withhold a residual value and can be recycled at end of life into new virgin steel or aluminium without any loss of properties; this ensures products do not end up in costly and unsustainable landfill sites.

One New Change features SAS International bespoke metal ceiling panels with an expanded metal mesh, finished in silver, red and black. The ground-breaking, bold and perceptive £300 million One New Change mixed-use development project won the MIPIM AR Future Project Award 2010. Now complete, the building has become known as the ‘Stealth Bomber’ after the radar-proof combat plane that inspired its faceted form and has also won a RIBA 2011 Award for London and LDSA Building Excellence Award. The design incorporates pedestrian arcades converging at the core of the building, reinstating a historic north-south pedestrian route and allowing new panoramas of London’s landmark St Paul’s Cathedral. SAS International supplied the ceiling solution for the retail corridors of the development with a concealed suspension system, working closely with the architects to create a result where no visible fixings can be seen through the ceiling plane. To complement this, bespoke metal ceiling panels were produced with an expanded metal mesh, finished in silver, red and black. A challenging material to work with, to ensure the mesh held a uniform shape and corners for the panels could be formed accurately, SAS International’s solution was to create a ‘picture frame’ behind each panel. This also helped to provide support for the concealed attachment bolts. Design challenges at One New Change included the building grid size and shape (it was termed the most difficult site in Europe), the complex geometry of the structure (including some tight ceiling to structural beam heights), and a shared fire strategy between retail and office storeys. Requirements to achieve an environmentally-friendly building, complying with Part L and BREEAM ratings, were also critical and the design uses a materials palette of limestone, metal, mirror and a new method of fritted glass on the exterior to help shield the interior from glare.

Acoustic SAS International metal ceiling systems were installed in the eight-storey Eqwater office building in Paris. SAS International’s SAS330 was installed throughout the office areas in the building. SAS330 is a lay-in metal ceiling tile system that provides functionality and outstanding acoustic performance for a range of cost-effective design options. The practical nature of its structure allows ease of construction and maintenance. The corridors of the building were fitted with SAS International’s SAS205. In some areas it is not possible to use a standard hanging bracket due to the number of services in the ceiling void, SAS205 is supported at the perimeters, up to a maximum width of 3000mm, making it a perfect solution for corridors. Metal offers an inert and inherently hard-wearing surface, making metal ceiling systems both hygienic and a low-maintenance option over the course of their lifespan. Only a simple cleaning routine is required. The lifespan of SAS International’s metal ceilings is in excess of 25 years with only very basic maintenance.

A Tricell system was designed by SAS International to fit the "Y" shaped departure lounge at Santiago Airport. SAS International has designed, manufactured and installed metal ceiling solutions for both interior and exterior areas of the new 74,000m² terminal of the Aeropuerto de Santiago, Spain. SAS810 tricell has been installed to create a triangular aesthetic in the departure lounges. This open cell system provides a geometric form that can easily be repeated for a striking finish. The flexible approach in SAS International’s design process enabled this unique solution to fit within the ‘Y’ shaped designed departure lounge. Installed in the main terminal and baggage hall, as well as exterior ceiling areas, is the linear profile system SAS710. The linear slat ceiling, designed so that each slat lines up neatly with the next, forms a perfect row resulting in clean and simple architectural lines. SAS710 was also chosen for the exterior of the building to provide continuity of design. Using specially designed slat retaining angles, the system has been adapted for strength and durability to prevent slats from being dislodged in high wind.

SAS International designed and manufactured a range of solutions for the new 75,000 square metres Terminal 2 at Dublin Airport, Ireland. According to Dublin Airport the new second terminal will be capable of comfortably handling up to 15 million passengers per year. Specification demanded that durability, ease of maintenance and acoustics were considered. SAS International worked with architects Pascall + Watson to design the ceiling solution answering the architect’s brief to factor in ongoing maintenance conducted by Facilities Management teams in the future. The design of these large sized ceiling panels required careful consideration at design stage to ensure they would be manageable when working at a height. Designed and developed specifically for Dublin Airport was 35,000 square metres of ceiling systems, installed in the main departure area, walkways and baggage handling areas. This solution looks like any other suspended metal ceiling system as it provides an aesthetically pleasing flush finish. But where this product differs is its ingenious way of allowing access to the ceiling void and services for ongoing essential maintenance. This is of particular benefit in high traffic areas such as Dublin airport as it enables a corridor to remain in use rather than having to close off the entire route. SAS International manufactured the 20,000m2 of large aluminium frames for the fabric ceilings which creates a striking central feature. Working closely with SAS International were local installers Platt and Reilly who applied the stretched fabric to the frames on-site and hoisted them into position. Creating a comfortable environment for traveller and worker was helped with the use of acoustic floating rafts and perforated metal ceiling solutions (with integrated acoustic pads) to provide the necessary acoustic control for this project. Lighting was suspended neatly between the rafts to also provide a modern finish to the corridors. In addition Perimeter heating and air handling grilles also enhance the experience.

Ivanhoe’s newest building is a landmark you can’t miss. The facade components of light bricks, dark cladding and luminous aluminium Click-on Battens perfectly complement each other, creating a contemporary finish. The interior also features our battens, which seamlessly connects to the exterior. The building comprises a three-level basement, ground floor retail outlets, two levels of offices and multiple fully appointed apartments among the two upper levels. The building is bordered on three sides by busy public roads which posed logistical challenges with its construction. However, the speed and ease of installing Click-on Battens alleviated this issue on the upper levels. The curved facade is wrapped in Sculptform aluminium Click-on Battens. They were installed upon standard and curved tracks which were delivered to site in a flexible state so that they’re able to be wrapped around the substrate and hug the exterior. Batten clips are factory fixed to the tracks at the spacing sequence that is specified. Helping to save time installing on-site. Battens are simply push-clicked onto mounting tracks that are positioned behind the battens in a concealed manner.

The first stage of a two hectare urban regeneration development in Docklands opened in 2018 and introduced the city of Melbourne’s first elevated public park. Floating 10 metres above open public space, a spectacular Tongue & Groove Cladding Soffit overhangs 90 metres, providing natural warmth and texture and remaining consistent with the design of the project. Installed by our partner installer Casello, the project is an example of how our expert installers can complete a project on time and on budget. Green space in the CBD Biophilic design principles were a key to the design of One Melbourne Quarter, bringing the warmth and beauty of natural materials to the workplace. The most prominent inclusion is the spectacular Skypark, located directly above the entrance of the building, on the second floor. The Skypark is a perfect ‘suspended oasis’, bringing the uniquely relaxing aspects of a local park to the inner city. A statement through a soffit With the Skypark suspended above street level, the underside presented a perfect opportunity for the architects Denton Corker Marshall to create a unique feature which was consistent with the design ambitions of the project. Behind the look Sculptform Tongue & Groove Cladding provided a beautiful natural aesthetic in spotted gum. The combination of visual features and colour variation contrasts the greys of the Melbourne CBD and contributes to the overall identity of the project. PEFC certified timber was required to meet Green Star Rating, which was then sourced by Sculptform.

The £70 million project saw SAS International design and manufacture bespoke spun alum­inium profiled discs, acoustic metal wall panelling and System 600 rafts in the new terminal. The architects 3D Reid had to make the building light, airy and modern yet the façade and various materials used within the terminal had to withstand potential of a security breach. All products installed ‘land-side’ were required to meet the requirements of Aviation Security in Airport Development (ASIAD). The result answers aesthetic demands, yet provides the highest level of performance for the requirements of the building. For the design to be realised, square aluminium sheets were cut by the manufacturer into a circle and spun into a dome. Installation in such an environment means safety cables had to be attached to each disc, wall panel, tile and raft to ensure they do not fall and cause injury. Allowance for safety cables to be attached had to be taken into consideration during the design phase. Large vertical wall panels with an ultra-micro perforation were also specified to provide the necessary acoustic properties required for this vast open space. The very fine 0.7mm perforation, with 1% open area, helps to manage acoustics within the large open spaced terminal. The off-site modular manufacture of the architectural metalwork products meant installation was quicker, which causes less disruption to such a busy environment, and in addition there is no waste on site. Aesthetic versatility can be achieved using SAS International Architectural Metalwork throughout projects. It also allows for inte­gration of M&E services into the building design while meeting design demands and durability requirements. The range includes acoustic baffles, acoustic wall panels, air handling units, bespoke ceilings, and column casings.