TREMproof 201/60R
Verified by manufacturer over a year ago
Single component, modified polyurethane waterproofing membrane.
Application
- An effective membrane for use on concrete, wood and prepared masonry surfaces, in areas such as retaining walls, below grade waterproofing, tunnels and planter boxes (with Anti-root additive).
Description
A high-solids, solvent curing modified polyurethane waterproofing membrane that can be applied primer-less to most concrete applications.
- Tested to AS 4654.1 – Waterproofing membranes for external above ground use.
- Single component minimises application errors with improper mixing of plural component products.
- Minimum 85% solids assist the contractor apply the correct dry film thickness by allowing them to quickly measure the wet film thickness.
- Multiple application types allow a single membrane to be used on many applications throughout the project.
- Low VOC.
General information
Material | Polyurethane waterproofing membrane. |
Uniclass | |
NATSPEC National Classification System | 0411 Waterproofing – External and Tanking |
SpecPack | 07130 Waterproofing and Tanking |
SpeedSpec | 07130 Waterproofing and Tanking |
Product range |
Specification data - Polyurethane (PUR) waterproof coatings
Standard | To AS 4654.1.Manufacturer guidanceIn compliance with the NCC for external waterproofing in Australia. Check with manufacturer. |
Form | Single component. high solids, solvent cured. |
Colour | Black. |
Curing time | Up to 24 hours. Manufacturer guidanceCure times as stated below are based upon standard ambient conditions of 18 to 30°C, 50% RH. For more information check with manufacturer. |
VOC content | 87 g/L. |
Sustainability data
Country of material origin | United States |
Country of product manufacture | United States |
Literature
TREMproof 201/60 TDS
Tremco Waterproofing Brochure
Similar products from Tremco
AlphaGuard BIO
TREMproof 250GC
TREMproof P85
Vulkem 350/346
Vulkem 360NF/951NF
Vulkem NEM