NBS Source
I'm a manufacturer

Application

Pick resistant; prison cells, schools & public amenities - Suitable as sealant/adhesive for small gaps (2-3mm) eg. Light fixtures to concrete - Not Suitable for construction movement joints

Description

Bostik Simson ISR 70-05 AP is a hybrid SMP based elastic adhesive sealant with high tensile strength which is suitable for use as a non-pick gap sealer in non-movement joints only (2-3mm). Simson ISR 70-05 AP adheres well without primer on clean, dry, dust and grease free substrates of aluminium, stainless steel, galvanised steel, zinc, copper, brass, powder coated metal and most lacquered metal surfaces. Commonly used in conjunction with Bostik Seal N' Flex FC, Simson ISR 70-05 AP forms part of Bostik’s non-pick prison, corrections, health and public specification where high levels of abrasion resistance and joint durability are required.

General information

Color

Black

Grey

White

Finish

Sealant.

Material

Silyl modified polymer.

Uniclass

Pr_20_31_02_52 Modified silane (MS) polymer adhesivesPrimary

NATSPEC National Classification System

0181a Adhesives and Sealants

0181 Adhesives, Sealants and Fasteners

SpeedSpec

03470 Tilt-Up Concrete

04220 Blockwork

04210 Brickwork

07462 Cladding External Walls

09260 Dry Wall Partitions and Linings

09300 Ceramic Tiling

08520 Metal Windows and Glazed Doors

09250 Plasterboard

SpecPack

04210 Brickwork

04220 Blockwork

09250 Plasterboard

09260 Dry Wall Partitions and Linings

09300 Ceramic Tiling

03470 Tilt-up Concrete

08520 Metal Windows and Glazed Doors

03450 Precast Concrete

07600 Metal Roofing, Siding and Roof Plumbing

07430 Sandwich Panels

07410 Insulated Roof and Wall Panels

Specification data - Modified silane (MS) polymer adhesives

Form

Silyl Modified Polymer (SMP).

Open time (minimum)

Up to 15 minutes (20%C / 50% RH).

Colour

Black.

Grey.

White.

Total VOCs (maximum)

15g/Lt

Paintability

-

Manufacturer guidance

Paint compatible with most industrial paint or lacquer systems, both alkyd resin and dispersion based (due to the large scale of different types of industrial paints a paint compatibility test is recommended). - Paintable after skin forming (wet on wet); this will not influence the curing speed.

Shore hardness - A

Approx 60.

Application temperature

Minimum 5 °C to maximum 35 °C.

Temperature resistance

Minimum -40 °C to maximum +120 °C.