PERLIFOC HP Eco+ - Fire Resistant Mortar
Verified by manufacturer over a year ago
Gypsum-based mortar for fire protection.
Application
Perlifoc HP Eco+ offers a wide range of protection for construction solutions, such as protection of steel structures, concrete structures and composite slab structures.
Description
PERLIFOC HP Eco+ is a gypsum-based mortar for fire protection of structural steel elements and is noted for its ecological certifications.
Perlifoc HP Eco+ has a low density with the use of light fillers, making it a high performance mortar with great benefits.
Features and benefits:
- Offers thermal insulation properties, in addition to having the Environmental Product Declaration (EPD).
- Compliant to AS1530.4 – 2014 and AS4100 as per BRANZ assessment FC15622.
- Provides fire resistance of up to 240 minutes, R240, depending on the structural element to be protected.
- CRADLE2CRADLE certified, which facilitates obtaining points in the LEED, BREEAM & WELL certifications.
General information
Finish | Manufacturer guidanceRough | Can be smoothed | It can be finished with paint without affecting the fire resistance of the product. |
Material | Manufacturer guidanceGypsum-based fireproof mortar. |
Uniclass |
Specification data - Fire-resisting mortars
Standard | To AS 1530.4 - 2014, AS4100 as per BRANZ - FC15622. |
Material | Gypsum-based. |
Fire resistance | |
Standard | To AS 1530.4. |
Value | R240 - Up to 240 minutes. |
Columns | Perlifoc HP ECO+ H-Section Columns Perlifoc HP ECO+ I-Section Beams Perlifoc HP ECO+ Hollow-Section |
Thickness | Required Thickness (mm) varies for a Design FRL (minutes) x/-/- Guidance for specification option: https://www.tremco.com.au/TremcoAustralia/media/SiteAssets/Brochures/Perlifoc-HP-ECO-Brochure.pdf?ext=.pdf |
Acceptable relative air humidity | In enclosed areas with little ventilation (basements, confined spaces, etc.), an RH no greater than 60% and adequate ventilation is recommended for correct drying. |
Application temperature | Between 3 and 43°C Guidance for specification option: Substrate temperature during the application must be at least 3°C above the dew point. |
Pack size | 17 kg |