NBS Source
I'm a manufacturer

Application

Suitable for fillings, anchorages, and structural repairs, such as:

  • Anchoring of pillars in concrete prefabricated structures.
  • Filling of steel column bases.
  • Beam support in bridges.
  • Anchoring of bolts, cables, etc.
  • Filling of machinery foundation between concrete and steel plates.
  • Structural repair and strengthening of damaged or weak concrete structures such as foundations, beams, pillars, etc.
  • Repairing joints in pavements.
  • Void-filling corrective process and consolidation under concrete slabs.

Description

MAXGROUT® is a one-component, non-shrink, waterproof mortar formulated from special cement and well-graded mineral products that provide high mechanical properties and fluidity. It comes in powder form, and contains no chlorides nor metal particles. Features and advantages include:

  • High early and ultimate strength.
  • Waterproof, fireproof, non-corrosive and non-toxic.
  • Non-shrink and slightly expansive (does not lose contact with the substrate where is placed).
  • Resistant to water, oil, and grease.
  • Unaffected by extreme temperatures once set.
  • Very good adhesion on surfaces – becomes a structural part of the substrate and withstands repeated loads.

General information

Color

Grey

Material

Cement

Warranty description

Ten year

Uniclass

Pr_20_31_53_13 Cementitious groutsPrimary

NATSPEC National Classification System

0341 Structural Steelwork

0310 Concrete - Combined

SpecPack

03310 Concrete

05100 Structural Steel

SpeedSpec

03310 Concrete

05100 Structural Steel

Specification data - Cementitious grouts

Sand or filler

Fine aggregates, 0–3 mm.

Water

Clean potable water.

Performance requirements

-

Compressive strength (minimum)

78.5 N/mm² at 28 days.

Manufacturer guidance

Refers to value when mixed with 14% of water.


When mixed with 12% of water, value is at 89.2 N/mm² (28 days).

Bleeding (maximum)

None.

Cone fluidity (maximum)

>300 mm.

Manufacturer guidance

Refers to slump value when mixed with 14% of water.


When mixed with 12% of water, value is at 209 mm.

Volume changes

12–14%.

Colour

Grey.

Form

One-component powder.

Setting time

5–6 hours.

Manufacturer guidance

At 20°C.

Sustainability data

Country of product manufacture

Spain

Literature

Maxgrout®

Maxgrout®