Luxafloor® WB
Verified by manufacturer over a year ago
Water borne epoxy floor coating.
Application
- Ideal for use in areas subject to foot traffic and rubber-tyred vehicle traffic.
- Can be applied as a slip resistant finish by using Luxafloor® Stir-in Aggregate Fine.
- Suitable use for internal floor areas where the odour of conventional epoxy floor coatings prevents their use.
Description
LUXAFLOOR® WB is a low build, water borne, two pack epoxy floor coating that provides a hardwearing gloss finish that is easy to clean. Some of its features include:
- Very tough film, suitable for commercial car parks.
- Water borne, low VOC, and low odour.
- Excellent adhesion to concrete.
- Good chemical resistance.
- Easy to clean.
General information
Material | Epoxy coating. |
Uniclass | |
NATSPEC National Classification System | 0277a Pavement Ancillaries – Traffic Coatings 0315 Concrete Finishes |
SpeedSpec | 03365 Concrete Finishes |
SpecPack | 03360 Concrete Finishes |
Specification data - Waterborne resin coatings
Composition | Epoxy. |
Colour | Clear.Light grey.Pewter.Jade.Koala grey.Signal red.Manufacturer guidanceAvailable in a range colours from the Luxafloor® Colour Chart (deep base), a limited range tinted colours and a clear coat. Contact manufacturer for details. |
Delivery and storage | Storage.Guidance for specification option: Store in well ventilated bunded area under cover and away from sources of heat. Refer to product data sheet. |
Execution | Airless spray.Brush.Conventional spray.Roller. |
Slip resistance class | To AS 4586. Guidance for specification option: Refer to Luxafloor Aggregates Technical Data Sheet for the full list of systems and ratings. Contact manufacturer for details. |
Sheen | Gloss. |
Coverage | 7.7 m²/L. Guidance for specification option: Varies depending on such factors as application method, ambient conditions, surface porosity and roughness. |
Drying time | 14 days (full curing). Guidance for specification option: Dry to touch:
7 days (full curing). Guidance for specification option: Dry to touch:
|
Dry film thickness | 65 microns. |
VOC | < 10 g/L. |
Surface | Concrete. Manufacturer guidanceRefer to product data sheet for surface preparation guide. |
Sustainability data
Contains Red List materials | Yes |
Similar products from Dulux
Duration T80
Duration X21
Duremax GFX
Duremax GPE
Duremax® HBE
Enviropoxy WBE
Luxafloor ECO₂
Luxafloor FCF
Luxafloor PTX
Luxafloor® LGE