Compare

KLP Series

Name: KLP Series
Brand: Construction Specialties
SKU: pQ5W16MZbGTYW7213mnKNs

Verified by manufacturer over a year ago

KLP25-25SS

An all-metal cover plate system fabricated from aluminium alloy and stainless steel that is highly resistant to rolling loads, distortion and wear.

Jump to:

+61 1300 272 602 Website

Application

Ideal for indoor and outdoor applications in areas such as shopping centres, airports and other high traffic areas.

Description

Cover plate system that allows significant horizontal movement in the floor slab, as well as vertical displacement while still maintaining structural integrity. Its flush stainless steel design stops dirt from entering the joint thus keeping the gap dirt free and clear of moisture. The integrated turn bar ensures the top plate remains centre at all times, even during shear movement.

General information

Warranty description	CS warrants that its products are manufactured free of defects and conform to the technical data listed. Under this warranty, we will replace (at no charge) any material proven defective when applied in accordance with our written instructions for applications recommended by us as suitable for subject products. CS shall not be liable for any injury, loss or damage, direct or consequential, arising out of the use of the product.

Uniclass	Pr_35_90_53_53 Metal section movement jointsPrimary
NATSPEC National Classification System	0612 Cementitious Toppings 0315 Concrete Finishes 0310 Concrete - Combined
SpecPack	03530 Concrete Screeds (Granolithic) 03360 Concrete Finishes 03310 Concrete
SpeedSpec	03530 Concrete Screeds (Granolithic) 03365 Concrete Finishes 03310 Concrete

Specification data - Metal section movement joints

Joint width (nominal)	25 mm.
Edging	-
Material	Aluminium (6061-T6 structural alloy).
Finish	Anodized.
Colour	Clear.
Insert	-
Material	Stainless steel (grade 304 No.4 finish). Anodised aluminium (6061-T6 structural alloy).
Colour	Clear.

Openings	12.5 mm. Guidance for specification option: Minimum. 37.5 mm. Guidance for specification option: Maximum.

KLP Series

Application

Description

General information

Warranty description

Uniclass

NATSPEC National Classification System

SpecPack

SpeedSpec

Specification data - Metal section movement joints

Joint width (nominal)

25 mm.

Edging

Material

Aluminium (6061-T6 structural alloy).

Finish

Anodized.

Colour

Clear.

Insert

Material

Stainless steel (grade 304 No.4 finish).

Anodised aluminium (6061-T6 structural alloy).

Colour

Clear.

Openings

Similar products from Construction Specialties