Grandeur® Non-Cyclonic (Pre-Painted Aluminium)
Verified by manufacturer over a year ago
Steel roofing and walling profile with curving capacity.
Application
Suitable for roofing and walling applications in stylish and elegant designs.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Description
Grandeur® is a steel roofing and walling profile with curving capacity. Some of its features include:
- Clean lines and classic look.
- Can be smooth curved to a radius of 0.60 m.
- Available in a wide range of colours and finishes.
- Offered in varying supporting substrates.
General information
Finish | Pre-painted. |
Material | Aluminium. |
Shape | Other Manufacturer guidanceStanding seam. |
Warranty description | Manufacturer guidanceCovered by BlueScope material warranties, subject to project assessment and terms and conditions. |
Uniclass | |
SpeedSpec | 07610 Roofing and Roof Plumbing 07462 Cladding External Walls |
NATSPEC National Classification System | 0436 Cladding – Profiled and Seamed Sheet Metal 0423 Roofing – Profiled Sheet Metal |
SpecPack | 07600 Metal Roofing, Siding and Roof Plumbing |
Specification data - Aluminium sheets
Standard | To AS/NZS 2728.Guidance for specification option: Installation of the cladding should be in accordance with AS 1562.1 and HB 39. |
Grade | 180 MPa. |
Size | |
Width | 325 mm.525 mm.Guidance for specification option: Recommended for walling applications only. Manufacturer guidanceRefers to profile width and coverage. Provide manufacturing tolerance of ±4 mm. |
Length | Manufacturer guidanceSheets are supplied custom cut to length to suit project requirements. Transportation limits apply. To address thermal expansion and contraction, recommended maximum sheet length is 24 m. Provide manufacturing tolerance of ±7 mm in length. |
Thickness | 0.90 mm.Guidance for specification option: Total Coated Thickness of 0.96 mm. 1.00 mm.Guidance for specification option: Total Coated Thickness of 1.06 mm. Manufacturer guidanceRefers to Base Metal Thickness or BMT. Indicated Total Coated Thickness (TCT) is based on standard COLORBOND®, single-sided material. |
Finish | |
Worked | Pre-painted. |
Applied | |
Coating | 5251/5052 H32. |
Thermal expansion | 5.9 mm average per 5.0 m. Manufacturer guidanceComputed at 50° C change. |
Frame or support | Plywood. Guidance for specification option: Options for plywood are:
Affix with 8g-15 x 25 mm Type 17 countersunk head metal screws. Two per fixed clip and three per sliding clip. Steel Batten. Guidance for specification option: Steel battens should be 40 mm x 0.55 mm BMT G550 minimum, with maximum spans of 1200 mm. Affix with M4.8-16 x 16 mm smooth top flat head metal screws. Two per fixed clip. Manufacturer guidanceRefers to recommended supports and fasteners if product is to be installed without insulation. |
Insulation | Manufacturer guidanceWhen insulation thickness up to 50 mm are installed, screws may need to be increased in number depending on insulation thickness and density. When insulation is required, Fielders® recommends the use of a thermal spacer. |
Installation | Manufacturer guidanceTo be installed with concealed stainless steel clips. |
Sustainability data
Country of material origin | Australia |
Country of product manufacture | Australia |
Recyclability | 100% Recyclable. |
Similar products from Fielders
Cadence™ Non-Cyclonic (Pre-Painted Aluminium)