You are viewing content for Australia.
Choose a country to see content for your location. Changing region will navigate you to the homepage.
Verified by manufacturer 11 months ago
One part fire rated intumescent polyurethane joint sealant
Bostik Fireban® One may be used internally and externally to seal linier joints, gaps and service penetrations in the following substrates: - Insitu concrete floors and walls. - Precast and tilt up panels. - Brickwork and blockwork. - Rendered masonry. - Plasterboard (Fire rated and/or acoustic rated). - Fibre cement sheet (Fire rated and/or acoustic rated)
Bostik Fireban® One is a fire rated intumescent, low modulus, one component, Class-A polyurethane sealant. When cured it will form a tough, flexible fire rated seal capable of cyclic expansion and compression movement of 50% (± 25%) of the original installed joint width. Bostik Fireban® One is resistant to normal weathering conditions such as rain, sunlight, snow, sleet, ozone, atmospheric contamination and pollution.
ColorLimestone, Off-white. | Grey Export. White Export. Other |
Finish | Smooth thixotropic paste. |
Material | Polyurethane. |
ShapeTool sealant to achieve concave shape. | Other |
SizeEnsure maximum adhesion to bond face and depth to width ratio of 1:1 for 10mm joints and 1:2 for joints over 10mm up to 50mm and 3:4 for some joints in specialist applications (contact Bostik for specific joint requirements and configurations). | - |
Uniclass | |
NATSPEC National Classification System | 0181a Adhesives and Sealants 0181 Adhesives, Sealants and Fasteners 0182 Fire-Stopping |
SpeedSpec | 07810 Fireproofing |
SpecPack | 07810 Fireproofing |
Standard | AS 1530.4 - 2014 AS 4072.1 - 2005 |
Material | Polyurethane. |
Colour | Limestone.Grey.White. |
Application temperature | Minimum 5 °C to maximum 35 °C. |
Curing time | Full cure 7 days on porous substrates. |
Joint width | Up to 50mm. |
Viscosity | Non-sag, smooth thixotropic paste. |
Fire resistance | Up to 4 hours to AS 1530.4-2014 and AS 4072.1-2005. |
Service temperature | Minimum -40 °C to maximum 70 °C. |
Cure time | 2mm/24 hours on porous substrates. |
Fully cured | 7 days on porous substrates. |
Specific gravity | 1.45 g/ml. |
Shore A hardness | 30. |
TensileStrength | > 1.3 N/mm². |
Elongation at break | > 900%. |
Joint movement | ± 25%. |
Country of product manufacture | Australia |