Enviro 200P Ultra
Verified by manufacturer over a year ago
Ultra-flexible modified polyurethane waterproofing membrane.
Application
Enviro 200P Ultra is used for the waterproofing of walls, floors, decks and roof areas that will be covered with a wearing surface, such as tiles or other appropriate protective coatings. Enviro 200P Ultra can also be used as a tank liner in permanent immersion situations.
- Internal & External Wet Areas
- Balconies & Decks
- Bathrooms, Kitchens, Laundries
- Roof Areas
- Fire Sprinkler Tanks
- Greywater Tanks
- Stormwater Retention Tanks
Description
Enviro 200P Ultra is an ultra-flexible, class III waterproofing membrane specifically designed for internal and external use under tiles and for a range of water tank applications. It is formulated on a water-based crosslinked copolymer system that is urethane modified. It is fast drying and exhibits very good elasticity, excellent adhesion and outstanding elongation. Some of its features and benefits include:
- Fast drying
- Water based, easy clean up
- Complies with AS 4858
- Very low VOC content
- Excellent vertical hold-up
- Excellent crack bridging ability
- Single component
- No reinforcing fabric required
- Modified polyurethane eliminates re-emulsification
- Compatible with ceramic tile adhesives; Enviro GTA and Enviro GTX
General information
Color | Grey |
Warranty description | Ten years. |
Uniclass | |
NATSPEC National Classification System | 0411 Waterproofing – External and Tanking |
SpeedSpec | 07140 Wet Area Membranes 07130 Waterproofing and Tanking |
SpecPack | 07130 Waterproofing and Tanking |
Specification data - Polyurethane (PUR) waterproof coatings
Standard | To AS 4858. |
Form | One-pack. |
Colour | Grey.Green. |
Application method | Brush. Roller. |
Application temperature | 10°C minimum, maximum 85% RH. Manufacturer guidanceMinimum application temperature and relative humidity |
Class | Class III. Guidance for specification option: Elongation at break 700%. |
Fully cured | 3 days. Manufacturer guidanceFull cure at 25°C, 50% Relative humidity |
Material: | Polyurethane. |
Recoating time | 2 – 4 hours. Manufacturer guidanceRecoat time at 25°C, 50% Relative humidity |
UV resistance | Good durability under prolonged exposure. |
VOC content | Very low VOC content. |
Sustainability data
Country of material origin | Australia |
Country of product manufacture | Australia |
Similar products from Envirosystems
Enviro 700X
Enviro HP1200
Enviro HP1200 AC
Enviro HP1200 PW
Enviro HP1200 with Enviro 800 TC