Verified by manufacturer over a year ago
This product makes cleaning and graffiti removal significantly faster and more cost effective due to its properties, hydrophobic nature and sealing of pores on the surface of substrates.
The 2-pack product is designed to be applied after the surface has been cleaned and prepared for the application. For very porous surfaces, ECOCLEAN Concrete Sealer should be considered as a primer before applying ECOCLEAN Ultra Graffiti Shield, however, you must consult our ECOCLEAN team for a project specific specification prior to quoting or commencing any application.
Applicable in areas such as:
ECOCLEAN Ultra Graffiti Shield is hydrophobic and specially formulated to provide optimal performance for internal and external areas including facades, transportation infrastructure such as tunnels and bridges, walls and floors and other surfaces that require protection from graffiti, water ingress and other chemicals.
Surfaces that are sealed using with ECOCLEAN Ultra Graffiti Shield will make cleaning and graffiti removal significantly faster and more cost effective due to the surface properties, hydrophobic nature and sealing of pores on the surface of the substrate.
Color | Clear Manufacturer guidanceClear light-yellow liquid (clear when dry, but can change appearance slightly by adding a sheen to the surface, substrate dependent). |
Finish | Anti-graffiti |
Material | Solvent-based |
Warranty description | Five year Manufacturer guidancePlease contact our ECOCLEAN team for warranty information specific to your project. |
Uniclass | |
NATSPEC National Classification System | 0431 Cladding - Combined 0315 Concrete Finishes |
SpecPack | 09965 Graffiti-Resistant Coatings 03365 Coloured Concrete Flooring 06165 Fibre Cement Products |
SpeedSpec | 03365 Concrete Finishes 06165 Fibre Cement Products |
Coverage | 20-100 g/m². |
Application method | paint pad. roller. brush. spray. |
Density | 0.91 kg/m³. |
Temperature | Drying temperature: 20°C (68°F). |
Drying time | Touch dry 6 hours. Hard dry 24 hours. |
Cure time | 3 days. |
VOC content | 802 g/L. |
Flash point | 12°C . |
Pot life | 60 minutes at 20°C. |
Contains Red List materials | No Manufacturer guidanceVOC of 802 g/L |
Country of material origin | Japan |
Country of product manufacture | Japan |
Recyclability | Please consider the environment and recycle the container where practicable. |