Aluminium Click-on Screens
Verified by manufacturer over a year ago
Anodised
Anodised
Proprietary Aluminium screen system, with customisable batten size, length and spacing options, pre-indexed with minimal fixings to create feature free-standing screens and barrier infills.
Application
Internal and external applications.
They can be used for a range of applications such as:
- Free standing screens.
- Office dividers.
- Balustrade infills.
- Staircase barriers.
- Facade screens.
Suitable for use in Class 4 corrosivity zones according to AS4312.
Description
Click-on Screens are excellent as balustrade infills, fulfilling the need to make barrier systems beautiful.
The detailed design and strong engineering allows for large batten spans between fixings which can also be invisible for a 360-degree clean, unhindered design.
They’ve been engineered to meet high load requirements and comply with C3 and C5 balustrade infill ratings according to AS1170.1.
General information
Color | Manufacturer guidanceVarious colours available. Colours are reproduced as accurately as possible, recommended to request product samples before making final selection. |
Finish | Wood finish aluminium. Real timber veneer. Anodised. Powder coated. |
Material | Aluminium. |
Shape | Rectangle |
Size | Manufacturer guidanceVarious sizes available. |
Length | Manufacturer guidanceUp to 6 m in length for Aluminium Click-on Screens. |
Uniclass | |
NATSPEC National Classification System | 0520 Partitions - Combined 0521 Partitions - Demountable |
Specification data - Relocatable partition systems
System performance | Material and product performance |
Panel partitioning | Partition panels. |
Applied finishes | Wood finish aluminium. Real timber veneer. Anodised. Powder coated. |
Colours | Antique gold. Black. Dark bronze. Dark gold. Light bronze. |
Batten size | 25 x 50 mm. Guidance for specification option: 25 mm, 40 mm and 60 mm spacing options. 30 x 60 mm. Guidance for specification option: 30 mm, 50 mm and 80 mm spacing options. 40 x 100 mm. Guidance for specification option: Coming soon. 60 mm, 80 mm and 100 mm spacing options. 50 x 150 mm. Guidance for specification option: 100 mm, 130 mm and 150 mm spacing options. |
Batten centres (maximum) | 3 m - 25 x 50 mm. 3 m - 30 x 60 mm. 4.5 m - 40 x 100 mm. 6 m - 50 x 150 mm. Manufacturer guidanceMaximum batten spans for interior applications. For exteriors, site specific engineering loads have not been considered such as wind or barrier loads. Recommended to consult structural engineer for confirmation. |
Gap | 25 mm minimum space. Manufacturer guidance
|
MountingType | Back mounted configuration. End mounted configuration. Combination back/ end. |
Fixing clips | Back mount fixed. Guidance for specification option: Back when using the Back Mount Method a 20 mm clear gap is required above or below the batten to enable installation and removal of the battens. Back mount float. Guidance for specification option: Back Mount Floating clip is only designed to take up to ± 5 mm for installation and thermal movement. Not suitable for building movement. All mounting tracks to be fixed to a continuous frame that eliminates building movement. If screen is a slab to slab application, or building movement is expected, refer to the End Mount floating clip. End mount fixed. End mount float. Guidance for specification option: The End Mount floating clip can take up to ± 25 mm of Building movement if installed with a 25 mm gap under the batten. |
Track | Split track - 45 w x 25 d (mm). Guidance for specification option: Used in straight applications for both back mount and end mount. Designed to span up to 1200 mm between balustrade posts. Track has pull out adjustment from 25-35 mm, to allow onsite packing. Slim Track - 45 w x 5 d (mm). Guidance for specification option: Default end mount track, designed to be slim to the floor and ceiling. Used for back mount curves down to a 600 mm radius. Fixing of this track must be through the centre of the clip casting. Direct fix. Guidance for specification option: Where no track is desired for both back mount and end mount. Complex site specific spacing. Sculptform does not take responsibility for the clip to substrate connection. Screw not supplied by Sculptform. Suitable fixing needs to be considered by the installer. M5 or 10 g countersunk screw is most suitable. Manufacturer guidanceMounting track type and substrate fixings. |
System application | Interior and exterior. |
Standard | To AS 4312. Guidance for specification option: Suitable for use in a Class 4 corrosivity zones. |
Sustainability data
Country of material origin | Australia |
Embodied carbonA1-A3 (production stage) as defined in BS EN 15804 | Manufacturer guidanceAlso available the Low Carbon Aluminium option from supplier for a small surcharge, which reduces the embodied carbon to less than 4 kg CO²-e per kg Aluminium. |
Recyclability | Yes. Manufacturer guidance95% of the product is Aluminium, which is infinitely recyclable. |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 95 % Guidance for specification option: Aluminium - infinitely recyclable. |
Similar products from Sculptform
Free Standing Timber Screens
Timber Click-on Screens