You are viewing content for Australia.
Choose a country to see content for your location. Changing region will navigate you to the homepage.
Compare variants
Summary
High performance polyaspartic coating system.
High performance polyaspartic coating system.
High performance polyaspartic coating system.
Application
Suitable for steel substrates in low corrosive (C1–C2) to highly corrosive environments (C3–C4).
Coats by environmental classification:
Up to C2
- 1st coat: Intercure 4500. DFT: 150 microns.
C3
- 1st coat: Intercure 4500. DFT: 180 microns.
C4
- 1st coat: Intercure 200. DFT: 75 microns.
- 2nd coat: Intercure 4500. DFT: 165 microns.
Suitable for steel substrates in low corrosive (C1–C2) to highly corrosive environments (C3–C4).
Coats by environmental classification:
Up to C2
- 1st coat: Intercure 4500. DFT: 150 microns.
C3
- 1st coat: Intercure 4500. DFT: 180 microns.
C4
- 1st coat: Intercure 200. DFT: 75 microns.
- 2nd coat: Intercure 4500. DFT: 165 microns.
Suitable for steel substrates in low corrosive (C1–C2) to highly corrosive environments (C3–C4).
Coats by environmental classification:
Up to C2
- 1st coat: Intercure 4500. DFT: 150 microns.
C3
- 1st coat: Intercure 4500. DFT: 180 microns.
C4
- 1st coat: Intercure 200. DFT: 75 microns.
- 2nd coat: Intercure 4500. DFT: 165 microns.
Description
Intercure® 4500 is a high performance polyaspartic coating system designed with excellent anti-corrosive properties and aesthetic durability. Some of its features include:
- Rapid cure coating (even at low temperatures).
- Anti-corrosive protection and long term aesthetic durability.
- Can be applied as a single coat direct-to-metal primer.
- High solids and low VOC mixture.
Intercure® 4500 is a high performance polyaspartic coating system designed with excellent anti-corrosive properties and aesthetic durability. Some of its features include:
- Rapid cure coating (even at low temperatures).
- Anti-corrosive protection and long term aesthetic durability.
- Can be applied as a single coat direct-to-metal primer.
- High solids and low VOC mixture.
Intercure® 4500 is a high performance polyaspartic coating system designed with excellent anti-corrosive properties and aesthetic durability. Some of its features include:
- Rapid cure coating (even at low temperatures).
- Anti-corrosive protection and long term aesthetic durability.
- Can be applied as a single coat direct-to-metal primer.
- High solids and low VOC mixture.
Finish
Semi-gloss
Semi-gloss
Semi-gloss
Specification
Classification data
Preparation
All surfaces to be prepared in accordance with the coating manufacturer's written instructions.
All surfaces to be prepared in accordance with the coating manufacturer's written instructions.
All surfaces to be prepared in accordance with the coating manufacturer's written instructions.
Primer coats
Intercure 4500. DFT: 150 microns.
-
-
Execution
Applied in accordance with the coating manufacturer's written instructions.
Applied in accordance with the coating manufacturer's written instructions.
Applied in accordance with the coating manufacturer's written instructions.
Primer coats
-
Intercure 4500. DFT: 180 microns.
-
Primer coats
-
-
Intercure 200. DFT: 75 microns.
Finishing coats
-
-
Intercure 4500. DFT: 165 microns.
Additional properties
Surface material
Steel surfaces should be assessed and treated in accordance with ISO 8504:2000, followed by abrasive blast cleaning to achieve Sa2½ in accordance with ISO 8501-1:2007. Refer to International Protective Coatings for full surface preparation requirements prior to commencement of work.
Steel surfaces should be assessed and treated in accordance with ISO 8504:2000, followed by abrasive blast cleaning to achieve Sa2½ in accordance with ISO 8501-1:2007. Refer to International Protective Coatings for full surface preparation requirements prior to commencement of work.
Steel surfaces should be assessed and treated in accordance with ISO 8504:2000, followed by abrasive blast cleaning to achieve Sa2½ in accordance with ISO 8501-1:2007. Refer to International Protective Coatings for full surface preparation requirements prior to commencement of work.
Application temperature
5°C–65°C.
5°C–65°C.
5°C–65°C.
Durability
Medium (7–15 years)., High (15-25 years).
Medium (7–15 years)., High (15-25 years).
Medium (7–15 years)., High (15-25 years).
Finish
Semi-gloss.
Semi-gloss.
Semi-gloss.
Volatile organic compound (VOC)
225 g/L.
225 g/L.
225 g/L.
Sustainability data
Contains Red List materials
Yes
Yes
Yes
Country of material origin
Australia
Australia
Australia
Country of product manufacture
Australia
Australia
Australia