Summary
Roofing and walling profile with two pans. Available in WA only.
Roofing and walling profile with two pans. Available in WA only.
Roofing and walling profile with two pans. Available in WA only.
Application
Suitable for both roofing and walling applications. Available in Western Australia only. For availability in other regions, contact local manufacturer.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Suitable for both roofing and walling applications. Available in Western Australia only. For availability in other regions, contact local manufacturer.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Suitable for both roofing and walling applications. Available in Western Australia only. For availability in other regions, contact local manufacturer.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Description
Shadowline® WA is a roofing and walling profile with two pans. Its panels can be button punched or pierced-fixed, depending on desired use. Some of its features include:
- Can be used down to a minimum of one degree pitch for roof decks.
- Can be fixed horizontally or vertically as wall cladding.
- Rolled to any transportable length.
- Available in a wide array of finishes and colours.
Shadowline® WA is a roofing and walling profile with two pans. Its panels can be button punched or pierced-fixed, depending on desired use. Some of its features include:
- Can be used down to a minimum of one degree pitch for roof decks.
- Can be fixed horizontally or vertically as wall cladding.
- Rolled to any transportable length.
- Available in a wide array of finishes and colours.
Shadowline® WA is a roofing and walling profile with two pans. Its panels can be button punched or pierced-fixed, depending on desired use. Some of its features include:
- Can be used down to a minimum of one degree pitch for roof decks.
- Can be fixed horizontally or vertically as wall cladding.
- Rolled to any transportable length.
- Available in a wide array of finishes and colours.
Material
Steel.
Steel.
Steel.
Shape
Rectangle
Rectangle
Rectangle
Specification
Classification data
Standards
To AS 1397 and AS/NZS 2728.
To AS 1397 and AS/NZS 2728.
To AS 1397 and AS/NZS 2728.
Grade
G300.
G300.
G300.
Coating class
AM100.
-
-
Base Metal thickness (BMT)
0.70 mm.
0.70 mm.
0.70 mm.
Profile
-
-
-
Form
Standing seam profile.
Standing seam profile.
Standing seam profile.
Height
48 mm.
48 mm.
48 mm.
Cover width
305 mm.
305 mm.
305 mm.
Colour
Basalt., Classic Cream., Cottage Green., Cove., Deep Ocean., Dune., Evening Haze., Gully., Ironstone., Jasper., Mangrove., Manor Red., Monument., Night Sky., Pale Eucalypt., Paperbark., Shale Grey., Surfmist., Terrain., Wallaby., Windspray., Woodland Grey.
-
-
Finish
Painted.
-
-
Solar absorptance value (maximum)
0.32–0.96.
-
-
Coating class
-
AM125.
-
Colour
-
Standard ZINCALUME steel colour.
-
Finish
-
Zinc-coated.
-
Coating class
-
-
AM150.
Colour
-
-
Dune., Monument., Surfmist., Wallaby., Windspray., Woodland Grey.
Finish
-
-
Painted.
Solar absorptance value (maximum)
-
-
0.32–0.73.
Additional properties
Material
COLORBOND® steel.
ZINCALUME® steel.
COLORBOND® steel.
Span
450 mm., 600 mm., 900 mm., 1200 mm., 1500 mm., 1800 mm.
450 mm., 600 mm., 900 mm., 1200 mm., 1500 mm., 1800 mm.
450 mm., 600 mm., 900 mm., 1200 mm., 1500 mm., 1800 mm.
Cyclonic performance
To AS/NZS 1170.2:2011 and AS 4040.1-1992.
To AS/NZS 1170.2:2011 and AS 4040.1-1992.
To AS/NZS 1170.2:2011 and AS 4040.1-1992.
Thermal expansion
2.9 mm average per 5.0 m.
2.9 mm average per 5.0 m.
2.9 mm average per 5.0 m.
Frame or support
Steel (1.0 to 3.5 mm)., Timber Hardwood., Timber Softwood., Steel Battens (0.55 to 1.0 mm).
Steel (1.0 to 3.5 mm)., Timber Hardwood., Timber Softwood., Steel Battens (0.55 to 1.0 mm).
Steel (1.0 to 3.5 mm)., Timber Hardwood., Timber Softwood., Steel Battens (0.55 to 1.0 mm).
Mass
9.53 kg/m² (COLORBOND® steel)., 9.36 kg/m² (ZINCALUME® steel).
9.53 kg/m² (COLORBOND® steel)., 9.36 kg/m² (ZINCALUME® steel).
9.53 kg/m² (COLORBOND® steel)., 9.36 kg/m² (ZINCALUME® steel).
Installation
Button punched., Pierced-fixed (for walling installations only).
Button punched., Pierced-fixed (for walling installations only).
Button punched., Pierced-fixed (for walling installations only).
Sustainability data
Country of material origin
Australia
Australia
Australia
Country of product manufacture
Australia
Australia
Australia
Recyclability
100% Recyclable.
100% Recyclable.
100% Recyclable.