You are viewing content for Australia.
Choose a country to see content for your location. Changing region will navigate you to the homepage.
Compare variants
Summary
Steel roofing and walling profile. Available in SA only.
Steel roofing and walling profile. Available in SA only.
Steel roofing and walling profile. Available in SA only.
Application
Can be used in either roofing or walling applications for modern and traditional designs. Suitable for roof pitch designs down to 3 degrees. Available in South Australia only.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Can be used in either roofing or walling applications for modern and traditional designs. Suitable for roof pitch designs down to 3 degrees. Available in South Australia only.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Can be used in either roofing or walling applications for modern and traditional designs. Suitable for roof pitch designs down to 3 degrees. Available in South Australia only.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Description
CorroMax 21® Non-Cyclonic is a roofing and walling profile manufactured from COLORBOND® steel and ZINCALUME® steel. Compared to Fielders' traditional S-Rib corrugated profile, the ribs of CorroMax 21® are 30% deeper, allowing for a higher rainwater carrying capacity. Some of its features include:
- Offers the benefits of strength with aesthetic appeal.
- Can be combined with Fielders® heritage products to achieve authentic restorations.
- Available in a range of lengths and thicknesses.
CorroMax 21® Non-Cyclonic is a roofing and walling profile manufactured from COLORBOND® steel and ZINCALUME® steel. Compared to Fielders' traditional S-Rib corrugated profile, the ribs of CorroMax 21® are 30% deeper, allowing for a higher rainwater carrying capacity. Some of its features include:
- Offers the benefits of strength with aesthetic appeal.
- Can be combined with Fielders® heritage products to achieve authentic restorations.
- Available in a range of lengths and thicknesses.
CorroMax 21® Non-Cyclonic is a roofing and walling profile manufactured from COLORBOND® steel and ZINCALUME® steel. Compared to Fielders' traditional S-Rib corrugated profile, the ribs of CorroMax 21® are 30% deeper, allowing for a higher rainwater carrying capacity. Some of its features include:
- Offers the benefits of strength with aesthetic appeal.
- Can be combined with Fielders® heritage products to achieve authentic restorations.
- Available in a range of lengths and thicknesses.
Material
Steel.
Steel.
Steel.
Shape
Rectangle.
Rectangle.
Rectangle.
Specification
Classification data
Standards
To AS 1397:2011, AS/NZS 2728:2013, AS 4040.0:1992, AS 4040.1:1992, AS 4040.2:1992, AS 4040.3:2018, AS/NZS 1170.0:2002, AS/NZS 1170.1:2002, AS/NZS 1170.2:2011, AS/NZS 1170.3:2011 and AS 1562.1:2018.
To AS 1397:2011, AS/NZS 2728:2013, AS 4040.0:1992, AS 4040.1:1992, AS 4040.2:1992, AS 4040.3:2018, AS/NZS 1170.0:2002, AS/NZS 1170.1:2002, AS/NZS 1170.2:2011, AS/NZS 1170.3:2011 and AS 1562.1:2018.
To AS 1397:2011, AS/NZS 2728:2013, AS 4040.0:1992, AS 4040.1:1992, AS 4040.2:1992, AS 4040.3:2018, AS/NZS 1170.0:2002, AS/NZS 1170.1:2002, AS/NZS 1170.2:2011, AS/NZS 1170.3:2011 and AS 1562.1:2018.
Grade
G550.
G550.
G550.
Coating class
AM150.
-
-
Base Metal thickness (BMT)
0.40 mm., 0.48 mm.
0.40 mm., 0.48 mm.
0.40 mm., 0.48 mm.
Profile
-
-
-
Form
Sinusoidal.
Sinusoidal.
Sinusoidal.
Height
21 mm.
21 mm.
21 mm.
Cover width
762 mm.
762 mm.
762 mm.
Colour
Dune., Monument., Surfmist., Wallaby., Windspray., Woodland Grey.
-
-
Finish
Painted.
-
-
Solar absorptance value (maximum)
0.32–0.73.
-
-
Coating class
-
AM100.
-
Colour
-
Basalt., Classic Cream., Cottage Green., Cove., Deep Ocean., Dune., Evening Haze., Gully., Ironstone., Jasper., Mangrove., Manor Red., Monument., Night Sky., Pale Eucalypt., Paperbark., Shale Grey., Surfmist., Terrain., Wallaby., Windspray., Woodland Grey.
-
Finish
-
Painted.
-
Solar absorptance value (maximum)
-
0.32–0.96.
-
Coating class
-
-
AM125.
Colour
-
-
Standard aluminium colour.
Finish
-
-
Zinc-coated.
Additional properties
Material
COLORBOND® steel.
COLORBOND® steel.
ZINCALUME® steel.
Span
600 mm., 900 mm., 1200 mm., 1500 mm., 1800 mm., 2100 mm., 2400 mm., 2700 mm.
600 mm., 900 mm., 1200 mm., 1500 mm., 1800 mm., 2100 mm., 2400 mm., 2700 mm.
600 mm., 900 mm., 1200 mm., 1500 mm., 1800 mm., 2100 mm., 2400 mm., 2700 mm.
Frame or support
Timber Softwood., Timber Hardwood., Metal Battens (0.55 mm to 1.0 mm)., Steel (1.0 mm to 3.0 mm).
Timber Softwood., Timber Hardwood., Metal Battens (0.55 mm to 1.0 mm)., Steel (1.0 mm to 3.0 mm).
Timber Softwood., Timber Hardwood., Metal Battens (0.55 mm to 1.0 mm)., Steel (1.0 mm to 3.0 mm).
Mass
3.40 kg/m or 4.40 kg/m² (0.40 mm COLORBOND® steel)., 4.00 kg/m or 5.92 kg/m² (0.48 mm COLORBOND® steel).
3.40 kg/m or 4.40 kg/m² (0.40 mm COLORBOND® steel)., 4.00 kg/m or 5.92 kg/m² (0.48 mm COLORBOND® steel).
3.40 kg/m or 4.40 kg/m² (0.40 mm COLORBOND® steel)., 4.00 kg/m or 5.92 kg/m² (0.48 mm COLORBOND® steel).
Sustainability data
Country of material origin
Australia
Australia
Australia
Country of product manufacture
Australia
Australia
Australia
Recyclability
100% Recyclable.
100% Recyclable.
100% Recyclable.
Recycled content
20 %
20 %
20 %