Summary
Structural roof sheeting for long span applications.
Structural roof sheeting for long span applications.
Structural roof sheeting for long span applications.
Application
Ideal for huge roofing spans and for cantilever overhangs up to 5 metres. Suitable for:
- Warehousing and storages.
- Workshops and factories.
- Sports stadia.
- Aircraft hangars.
- Potable water reservoir roofing.
- Commercial car parks.
- Shelters and other shade structures, such as schools, bowl clubs, pavilions and livestock feed lots.
- Can also be used as a gutter profile.
Minimum order quantities may apply. Contact manufacturer for details.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Ideal for huge roofing spans and for cantilever overhangs up to 5 metres. Suitable for:
- Warehousing and storages.
- Workshops and factories.
- Sports stadia.
- Aircraft hangars.
- Potable water reservoir roofing.
- Commercial car parks.
- Shelters and other shade structures, such as schools, bowl clubs, pavilions and livestock feed lots.
- Can also be used as a gutter profile.
Minimum order quantities may apply. Contact manufacturer for details.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Ideal for huge roofing spans and for cantilever overhangs up to 5 metres. Suitable for:
- Warehousing and storages.
- Workshops and factories.
- Sports stadia.
- Aircraft hangars.
- Potable water reservoir roofing.
- Commercial car parks.
- Shelters and other shade structures, such as schools, bowl clubs, pavilions and livestock feed lots.
- Can also be used as a gutter profile.
Minimum order quantities may apply. Contact manufacturer for details.
AUSTRALIAN STANDARDS
Published load capacity data is derived from testing in accordance with:
- AS 4040.0:1992.
- AS 4040.1:1992.
- AS 4040.2:1992.
- AS 4040.3:2018.
Published Limit state capacities are suitable to determine structural adequacy and serviceability in accordance with:
- AS/NZS 1170.0:2002 Structural design actions, Part 0: General principles.
- AS/NZS 1170.1:2002 (Reconfirmed 2016) Structural design actions, Part 1: Permanent, imposed and other actions.
- AS/NZS 1170.2:2011 (Reconfirmed 2016) Structural design actions, Part 2: Wind actions.
- AS/NZS 1170.3:2011 (Reconfirmed 2016) Structural design actions, Part 3: Snow and ice actions.
Published installation guidelines align with AS 1562.1:2018 Design and Installation of sheet and wall cladding.
Fielders steel products comply with:
- AS 1397:2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium.
- AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements.
- AS 1397:2011 which defines the coating types and classes and steel grades for hot dip metallic coated steel.
Description
ARAMAX® is a structural roof sheeting that allows spans of up to 20 metres with no purlins or girts. It is rollformed from prepainted steel and aluminium and is a deeper profile than conventional steel cladding. Some of its features include:
- Reduces structural steel and cladding cost up to 30%.
- Significantly reduces construction time.
- Accommodates irregular geometry.
- Offers long, joint-free spans.
- Available in a wide range of colours.
- Waterproof and vermin-free.
ARAMAX® is a structural roof sheeting that allows spans of up to 20 metres with no purlins or girts. It is rollformed from prepainted steel and aluminium and is a deeper profile than conventional steel cladding. Some of its features include:
- Reduces structural steel and cladding cost up to 30%.
- Significantly reduces construction time.
- Accommodates irregular geometry.
- Offers long, joint-free spans.
- Available in a wide range of colours.
- Waterproof and vermin-free.
ARAMAX® is a structural roof sheeting that allows spans of up to 20 metres with no purlins or girts. It is rollformed from prepainted steel and aluminium and is a deeper profile than conventional steel cladding. Some of its features include:
- Reduces structural steel and cladding cost up to 30%.
- Significantly reduces construction time.
- Accommodates irregular geometry.
- Offers long, joint-free spans.
- Available in a wide range of colours.
- Waterproof and vermin-free.
Finish
5052 Marine grade aluminium, H38 Temper.
5052 Marine grade aluminium, H38 Temper.
5052 Marine grade aluminium, H38 Temper.
Material
5052 Marine grade aluminium, H38 Temper.
5052 Marine grade aluminium, H38 Temper.
5052 Marine grade aluminium, H38 Temper.
Shape
Rectangle
Rectangle
Rectangle
Warranty description
30 years.
30 years.
30 years.
Specification
Classification data
Standard
AS 1562.1:2018, AS 1664.1:1979 and AS/NZS 1734:1997.
AS 1562.1:2018, AS 1664.1:1979 and AS/NZS 1734:1997.
AS 1562.1:2018, AS 1664.1:1979 and AS/NZS 1734:1997.
Thickness (nominal)
1.20 mm.
-
-
Profile
-
-
-
Height
357 mm.
-
-
Cover width
700 mm.
-
-
Colour Side 1
Enduro Green., Glacier White., Gull Grey., Moon Shadow., Obelisk Grey., Sahara., Slate Grey.
Enduro Green., Glacier White., Gull Grey., Moon Shadow., Obelisk Grey., Sahara., Slate Grey.
Enduro Green., Glacier White., Gull Grey., Moon Shadow., Obelisk Grey., Sahara., Slate Grey.
Thickness (nominal)
-
1.20 mm.
-
Height
-
314 mm.
-
Cover width
-
800 mm.
-
Thickness (nominal)
-
-
1.20 mm.
Height
-
-
247 mm.
Cover width
-
-
900 mm.
Additional properties
Coating application
Single sided., Double sided.
Single sided., Double sided.
Single sided., Double sided.
Material/ Finish
5052 Marine grade aluminium, H38 Temper.
5052 Marine grade aluminium, H38 Temper.
5052 Marine grade aluminium, H38 Temper.
Cyclonic performance
AS 4040.1:1992.
AS 4040.1:1992.
AS 4040.1:1992.
Weight (approximate)
5.816 kg/m².
5.089 kg/m².
4.523 kg/m².
Installation
Overslung connection., Underslung connection.
Overslung connection., Underslung connection.
Overslung connection., Underslung connection.
Insulation
ARAMAX® Twin Skin Roofing and Ceiling., ARAMAX® Perforated Ceiling., ARAMAX® Insulation Blanket., ARAMAX® Ceiling Hangers.
ARAMAX® Twin Skin Roofing and Ceiling., ARAMAX® Perforated Ceiling., ARAMAX® Insulation Blanket., ARAMAX® Ceiling Hangers.
ARAMAX® Twin Skin Roofing and Ceiling., ARAMAX® Perforated Ceiling., ARAMAX® Insulation Blanket., ARAMAX® Ceiling Hangers.
Ancillary components
ARAMAX® Skylights., Light Hangers., Service Trays., Edge Restraints., Solar panels and arrays., ARAMAX® to Wall Interface., Mitre Cut Detail., Penetration Detail.
ARAMAX® Skylights., Light Hangers., Service Trays., Edge Restraints., Solar panels and arrays., ARAMAX® to Wall Interface., Mitre Cut Detail., Penetration Detail.
ARAMAX® Skylights., Light Hangers., Service Trays., Edge Restraints., Solar panels and arrays., ARAMAX® to Wall Interface., Mitre Cut Detail., Penetration Detail.
Sustainability data
Country of material origin
Australia
Australia
Australia
Country of product manufacture
Australia
Australia
Australia
Recyclability
100% Recyclable.
100% Recyclable.
100% Recyclable.
Recycled content
80 %
80 %
80 %