Verified by manufacturer 3 months ago
200 mm
Medium duty cast in channel.
The channel is intended for use in reinforced concrete with a minimum compressive strength class of C20/25 or greater.
The 31/21 Axis Curve is a medium duty cast in channel that provides a load capacity exceeding that of a standard 38/17 channel section. The channel is intended for use in reinforced concrete with a minimum compressive strength class of C20/25 or greater. The channel assembly consists of the channel section, combined with welded studs, and a specially designed T Head Bolt.
The channel is designed to be used exclusively with ACS systems, with its main use being to fix back ACS Masonry Support brackets.
Axis Curve is produced from Stainless Steel, 1.4301 (304) grade and is supplied with welded anchor studs at 150 mm centres.
The 31/21 Curve has been tested to attain design resistances for easy comparison to applied design loads. The resistances are dependent on distances to the edge of the concrete.
ACS Curve T Head Bolts:
The ACS Curve T Head Bolt is designed, manufactured and tested in line with the guidance of BS EN ISO 3506-1:2009, Mechanical Properties of Stainless Steel Fasteners The Bolt is installed into the slot between the lips of the channel and rotated through 90°. During this operation, the bolt engages with the curved profile of the channel and is driven forward in the channel until the bolt locks into the front of the channel allowing ancillary components to be fixed. The bolt has a slot feature on the end of the shank to illustrate its orientation, which should be approximately vertical in its final fixed position.
Color | Silver |
Finish | Natural |
Material | Stainless steel |
Length | 200 mm 350 mm 500 mm 650 mm 800 mm |
Height | 28 mm |
Uniclass | |
CAWS | E42/340 Channels and slots E42/340 Channels and slots |
Designation | 1.4301. |
Anchors | 2no. welded anchor studs at 150 mm centres. |
Bolts | |
Format | ACS Curve T Head Bolts. |
Steel grade | A4-70. |
Thread diameter | M12. |
Length | 200 mm. |
Contains Red List materials | No |
Country of product manufacture | United Kingdom |
Recyclability | Fully recyclable |
Recycled contentAs defined in clause 7.8 of BS EN ISO 14021 | 90 % |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
![]() | - | 1 |
![]() | - | 1 |